A Servo company - serving Aurora, CO

New Door Installation in Aurora, CO

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as $59/month*on approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Styles & brands we work with

Raised-panel steel
Raised-panel steel
Carriage house
Carriage house
Modern flush
Modern flush
Full-view glass
Full-view glass
LiftMaster openers
LiftMaster openers
Chamberlain openers
Chamberlain openers

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

New Door Installation in Aurora, CO

New garage door installation in Aurora typically ranges from $1,200 to $3,500, depending on the material, insulation R-value, and hardware requirements. At Servo Garage Doors Aurora, we handle every new door project by first assessing your existing track and framing to ensure the new weight load is supported, providing a written, flat-price scope before a single tool touches your property. If you are looking to replace an old, damaged door or upgrade for better thermal efficiency in the Colorado climate, we provide transparent, upfront pricing. Call us at (720) 477-6050 to discuss your project; we provide free estimates for all new installations.

We operate as an independently owned and operated business under The Haven Standard. This means we do not rely on sales tactics or urgency. Instead, we follow Clause 1 of our standard, which mandates a written price and scope of work before any installation begins. Whether you are replacing a door damaged by heavy spring tension or simply modernizing your home’s curb appeal, our process is designed to give you a clear paper trail. You can find more details on our broader Garage Door Installation in Aurora page, which covers the full scope of our replacement and setup services.

When You Need New Door Installation

Not every issue requires a full door replacement. However, certain conditions make a new door the most cost-effective and safe solution for homeowners in Aurora. We recommend considering a new door installation in the following scenarios:

  • Structural Damage to Panels: If the bottom or middle sections of your door have been dented or crushed by a vehicle, replacing individual panels is often impossible if the manufacturer has discontinued that specific model or color.
  • Significant Rust or Corrosion: Aurora homes near areas with higher moisture or those with older steel doors often see rust creeping from the bottom up. Once the structural integrity of the steel is compromised, it cannot be safely repaired.
  • Poor Thermal Performance: Older, non-insulated doors offer little protection against the temperature swings we see in Colorado. Switching to an insulated door with a higher R-value helps regulate the temperature in your garage, which is vital if you use the space as a workshop or have living quarters above it.
  • Safety Compromises: If your door is older and lacks modern safety features like pinch-resistant joints, installing a new, code-compliant door significantly reduces the risk of finger entrapment or severe injury.
  • Failed Torsion or Extension Systems: If your current door is too heavy or improperly balanced for the existing spring system, and the door itself is outdated, upgrading to a modern, lighter-weight door can prevent premature failure of your garage door opener and springs.

When you call us for a consultation, we inspect these specific components. If a repair is safer and more affordable, we tell you that. We only recommend a full installation when the existing equipment is beyond its functional life or when the cost of repair approaches the cost of a new unit.

Our New Door Installation Process

Two professional technicians installing a new residential garage door
Our New Door Installation Process

Our installation process is built on the foundation of The Haven Standard, ensuring that you know exactly what is happening at every stage. We do not perform “handshake” deals; every step is documented.

  1. On-Site Assessment: We visit your home in Aurora to measure the opening, check the headroom, and inspect the side clearance. We also check the condition of your existing tracks and framing to see if they can support the new door or if they need to be replaced.
  2. Written Scope and Price: Per Clause 1, we provide a flat, written price for the entire job. This includes the door, hardware, labor, and removal of your old door. You see the price before we start.
  3. Removal and Disposal: We carefully remove the old door, ensuring that high-tension springs and cables are safely managed. We haul away the old materials so you are not left with the debris.
  4. Installation and Calibration: We install the new door, ensuring it is level and plumb. We then calibrate the spring tension to match the exact weight of the new door, which is critical for the longevity of your opener.
  5. Documentation and Testing: Once installed, we test the door through multiple cycles. We provide a documented photo record of the finished work, proving that the installation meets our quality standards.

We work with major manufacturers like Amarr, Wayne Dalton, and Raynor. Whether you prefer a classic steel carriage house door or a modern, flush-panel design, we ensure the hardware-rollers, hinges, and cables-is matched to the weight of your specific door choice.

BeforeBefore
AfterAfter

New Door Installation Pricing in Aurora

We believe in upfront, written pricing. While a phone estimate can give you a starting point, the final cost of a new door installation in Aurora depends on specific variables like door material, insulation needs, and local permit requirements. For detailed information, see How Much Does Garage Door Installation Cost? (2026 Price Guide) - Aurora, CO. The following table provides a general breakdown of what influences the final price on your quote.

Component Price Range (Estimated) Notes
Standard Non-Insulated Steel Door $1,200 - $1,800 Basic model, suitable for detached garages.
Insulated Steel Door (R-Value 6-10) $1,800 - $2,600 Better climate control for attached garages.
High-R-Value Custom/Carriage Door $2,600 - $3,500+ Premium materials, windows, and design elements.
Removal & Disposal Fee $150 - $300 Includes safe hauling of old door and springs.

If you have received a written estimate from another company, we offer a Free Second Opinion. Bring the paperwork to us, and we will review it against our own standards. We often find that competitors overlook specific hardware requirements or fail to account for the weight of the new door, leading to “surprise” charges later. Call (720) 477-6050 to schedule your assessment.

FAQs - New Door Installation

Two professional technicians performing a residential garage door installation on ladders.
FAQs - New Door Installation

How long does a new garage door installation take?

A standard residential garage door installation in Aurora typically takes between 4 to 6 hours for a single-car door, while double-car doors or complex carriage-style doors may require a full day. We prioritize efficiency without rushing the safety calibration, ensuring the door operates smoothly and quietly before we leave your property. Call (720) 477-6050 for a specific timeline for your home.

Do I need to replace my garage door opener when I get a new door?

You do not always need to replace your opener, but we must verify that your existing opener is powerful enough to handle the weight of the new door. If your current opener is a belt-drive or chain-drive model that is in good condition, we can usually reinstall it, provided the mounting hardware is compatible. If you are upgrading from a non-insulated door to a heavy, insulated steel door, the added weight may stress an older opener, and we will advise you on whether a motor upgrade is necessary during our initial assessment.

Is it cheaper to repair my old door or install a new one?

If your door has minor issues like a broken spring, a snapped cable, or a worn-out roller, a repair is almost always the more cost-effective choice. However, if the door has sustained significant panel damage, or if the cost of multiple repairs-such as replacing springs, tracks, and hinges simultaneously-approaches the cost of a new unit, we will present both options in writing. We provide a clear, evidence-based breakdown of the costs so you can make an informed decision without pressure.

Does the installation include the removal of my old garage door?

Yes, every new door installation we perform includes the removal and disposal of your old garage door and its hardware. We handle the heavy lifting and ensure that the old materials, including steel panels and potentially dangerous high-tension springs, are removed from your property safely. This is part of the flat, written price we provide before any work begins, so you won’t see unexpected disposal fees on your final invoice.

Written by Marcus Deller, Owner at Servo Garage Doors Aurora, serving Aurora.

Need Garage Door help in Aurora? Licensed & insured · 1-hour response · free estimates
Call (720) 477-6050
Local Service Coverage

Request a Free Estimate in Aurora

Tell us what you need - Servo Garage Doors Aurora responds fast. No obligation.

By clicking submit, you accept our Privacy Policy and agree to be contacted through phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Now
Call Now - 24/7 Dispatch