Sensor Calibration in Aurora, CO

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as $59/month*on approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Sensor Calibration in Aurora, CO

Garage door sensor calibration in Aurora typically costs between $95 and $165, depending on the complexity of the alignment and whether the safety eyes themselves require replacement due to sun-glare damage or wiring issues. At Servo Garage Doors Aurora, we perform this service as part of our standard Garage Door Repair in Aurora protocol, ensuring your safety eyes communicate perfectly with the logic board every single time. If your door reverses unexpectedly or refuses to close unless you hold the wall button, your sensors likely need precise recalibration or a realigned bracket.

We operate as an independently owned and operated business under The Haven Standard. This means we do not guess at the problem. When you call (720) 477-6050, we arrive, assess the obstruction or Track Realignment need, and provide a flat, written price before we touch a single tool. This is Clause 1 of The Haven Standard: no surprises, no “call for a quote” games, and no hidden fees. We serve the entire Aurora area, from the newer developments near E-470 to the established neighborhoods surrounding the Aurora Reservoir, where fluctuating temperatures often cause mounting brackets to shift over time.

When You Need Sensor Calibration

Sensors are the primary safety mechanism for your garage door. When they fail, the door loses its ability to detect objects in its path, which is a significant security and safety risk. We often see these issues arise in specific ways across our local service area. If you notice these symptoms, it is time for a professional adjustment:

• The door reverses immediately upon closing: This is the most common sign. If the door starts to come down and then pops back up, the invisible infrared beam between the two sensors is broken or misaligned.
• The wall button flashes: Most modern openers, such as those from LiftMaster or Chamberlain, will flash the LED light on the wall console a specific number of times to indicate a sensor error code.
• Sunlight interference: In east-facing garages common in many Aurora subdivisions, direct morning sunlight hitting the receiving sensor can blind the unit, causing it to think an object is blocking the path.
• Loose or bent mounting brackets: The brackets holding your sensors to the door tracks are susceptible to vibration. If a bracket was bumped by a car or a storage box, the sensors will fall out of alignment.
• Intermittent operation: If the door works sometimes but not others, there may be a loose wire at the logic board or a fraying cable along the rail that only disconnects when the door moves to a certain position.

Because these components involve the safety-reversal system, we always recommend having a trained professional verify the alignment. A miscalibrated sensor is not just an inconvenience; it is a safety risk for your family and pets. We are ready to assist; call (720) 477-6050 to schedule a technician who will provide a documented assessment of your system.

Our Sensor Calibration Process

We do not believe in “quick fixes” that don’t last. Every calibration job follows a strict, repeatable process that ensures the safety eyes are not just aligned, but secured against future movement. We document our findings so you have a clear record of what was wrong and how we corrected it.

1. Visual Inspection of the Mounting Hardware: We first check the brackets holding the sensors to the door track. If the bracket is bent-often caused by accidental contact with a vehicle-we straighten or replace the mount before attempting to align the sensor.
2. Infrared Beam Verification: We use a diagnostic tool to verify the strength of the infrared signal between the sending and receiving eyes. If the signal is weak, we check the wiring for continuity.
3. Precision Alignment: We adjust the angle of the sensors to ensure the beam is centered perfectly. This is a delicate process; we tighten the wingnuts or mounting screws to ensure the sensor cannot be bumped out of position again.
4. Logic Board Communication Test: After alignment, we test the opener’s logic board response. The sensor must signal the opener to reverse within a fraction of a second when the beam is broken.
5. Documented Photo Record: Per Clause 4 of The Haven Standard, we photograph the before and after state of your sensors. You receive this documentation so you can see exactly what was preventing the door from closing and the final position of the sensors.

Whether you use a Raynor system or a classic Craftsman opener, our approach remains the same. We focus on the mechanics of the system rather than selling you parts you do not need. If the sensors are functional but just misaligned, that is exactly what we will tell you.

Before

After

Sensor Calibration Pricing in Aurora

We believe in upfront, written pricing. You will never be surprised by an invoice at the end of a job. Below is the typical breakdown for sensor-related work in the Aurora market. These prices include the labor to align, test, and verify the safety system.

The cost varies based on the specific opener model and the amount of wiring work required. For example, if a rodent has chewed through the low-voltage wire running along the ceiling, the labor cost will be higher than a simple Cable Repair or bracket adjustment. We provide a firm, written quote before we start any work-not an estimate that changes later. If you have received a quote from another company, we offer a Free Second Opinion. Just bring the paperwork, and we will review it against our standard pricing.

FAQs - Sensor Calibration

How do I know if my garage door sensors are bad?

Your sensors are likely failing if the garage door refuses to close and the indicator light on the motor unit or the wall console is blinking. If you have checked for physical obstructions (like a broom or a toy) in the path of the beam and the door still won’t close, the sensors themselves or the wiring connecting them to the opener are the primary suspects. Call (720) 477-6050 for a professional diagnosis.

Can I fix misaligned sensors myself?

While you can sometimes nudge a loose bracket back into place, we strongly advise against attempting to repair or bypass the sensors yourself. These are critical safety devices; if they are not calibrated to the exact manufacturer specifications, the door may fail to reverse when it encounters an obstruction, which is dangerous. If you are struggling with alignment, our team is equipped to handle the home service call and ensure the system meets safety standards.

Why does my door only close when I hold the wall button?

When you have to hold the wall button to close the door, the opener is telling you that it has detected a fault in the safety-reversal system, specifically the sensors. This is a manual override mode that allows you to close the door in an emergency, but it is not a permanent solution because the safety sensors are effectively disabled. This indicates that your sensors are either misaligned, the wiring is broken, or the eyes have failed internally-issues our our Garage Door Repair services can resolve.

Do you service all garage door opener brands?

Yes, we service all major brands, including Amarr, Wayne Dalton, Craftsman, and Raynor. Because we are independently owned and operated under The Haven Standard, we focus on the mechanics of the door and opener system regardless of the brand name on the motor. Our technicians are trained to identify the specific calibration requirements for different sensor generations, from older wired systems to modern, high-sensitivity units, and can handle Spring Repair if needed.

Written by Marcus Deller, Owner at Servo Garage Doors Aurora, serving Aurora.